Build UV Sticker Gang Sheet
Learn how to use the gang sheet builder
Description
UV DTF Stickers / Gang Sheets
UV-DTF (Ultraviolet Direct Transfer Film) lets you apply full-color, durable designs to a wide range of hard surfaces. Printed with UV ink, these transfers deliver sharp detail, vibrant color, and excellent resistance to scratches and everyday wear.
Artwork Requirements
-
Ensure your design software is set to CMYK mode. Colors created in RGB will print differently because all prints are produced in CMYK. PNG art is always preferred.
-
Your artwork should be 300 DPI (or as close as possible). Simply saving a low-resolution image as 300 DPI does not improve its quality.
-
Double-check your gang sheet before submitting. This includes:
-
Size
-
Resolution
-
Colors
-
Backgrounds
-
Spacing
-
Any imperfections
-
-
The customer is fully responsible for the accuracy of the final file. If you submit an incorrect file and it has already been printed, reprints are full price.
-
For new customers, we strongly recommend ordering a small test sheet before sending your final design.
Recommended Surfaces
Great for adding permanent, professional branding or decoration to:
-
Personal items: phone cases, notebooks, keychains
-
Home goods: mugs, tumblers, plates, frames
-
Other surfaces: wood, metal, plastic, and glass
(Not intended for fabrics or flexible surfaces.)
How to Apply UV DTF Stickers
-
Prep the sticker
Turn the sticker over and firmly scrape the back with a squeegee or card to activate the adhesive. -
Peel the backing
Carefully and slowly peel away the paper backing, leaving the design on the clear transfer film. -
Place on surface
Position the sticker on your clean, dry surface and press it down. -
Burnish the design
Scrape over the design with a card or squeegee to remove bubbles and ensure full adhesion. -
Remove the top film
Slowly peel off the clear top film, leaving the printed design on the surface.
Care & Storage
-
Storage: Keep sheets in a cool, dry place away from direct sunlight and moisture.
-
Cleaning: After application, clean the decorated surface with a soft, damp cloth only. Avoid harsh chemicals and abrasive cleaners.
-
Long-term use: For maximum durability, avoid exposing decorated items to extreme temperatures and always follow the application steps carefully.
Care
Before Pressing
- Store sheets flat or loosely rolled, print-side out, in a cool, dry place away from heat or sunlight.
- Handle by the edges to avoid oils, lint, or moisture.
- Pre-press your garment for 2-5 seconds to remove moisture and wrinkles.
Pressing Instructions (General Guidance)
Your results depend on your press, garment, and technique. Please test first.
- Heavy pressure @ 320°F
- First press: 8–10 seconds
- Peel fast and in one motion, immediately after pressing (hot peel).
- Second press: 2–5 seconds using Teflon or butcher paper for durability.
Tip: When cutting out designs, leave extra film on the side you’re peeling from — this makes lifting much easier.
After Application (Garment Care)
- Wait 24 hours before washing.
- Wash inside out, cold water, no bleach or softeners.
- Hang dry for best longevity; tumble dry low if needed.
- Do not dry clean.
- Do not iron directly on the print — use parchment if ironing the garment.
High heat (especially in dryers) can cause premature cracking or peeling, so follow washing and drying instructions carefully.
Shipping & Returns
- Standard delivery within 2–5 business days
- We do not offer refunds, returns, or exchanges on custom products.
- The only time a reprint is issued is if the mistake was made on our end.
- Please review your artwork and order details carefully before submitting.
